I am using HDMI and I get no picture

A list of everything you need to know. Maybe...
User avatar
Posts: 368
Joined: Tue May 30, 2017 6:27 am
Location: Ljubljana, Slovenia

I am using HDMI and I get no picture

Postby mitja_i » Thu Feb 20, 2020 5:37 pm

When the Next boots hold down D for DIGITAL (HDMI) – Mode 7 50hz / 60hz can be selected. N selects the next frequency, ENTER selects it and saves. ONLY PRESS ENTER if you actually see a screen like the one below. N is NOT necessary as the testscreen will automatically go to the next mode albeit slower.

You will also get an audible intermittent tone so you know your audio is working. It's possible your display can lock onto both modes but only one being able to lock onto the audio. Choose the one with the tone before pressing ENTER.
Figure02-TestScreenMode7.png (62.09 KiB) Viewed 1765 times
Backer 423 @ 37% funded, 10th hour. Base version. Shipping nr. 533. Received February 19, 2020.
Backer 1027 @ 141% funded, 10th minute.

Original 48K (issue 4b) with IF1, two microdrives and vDrive.
ZX Spectrum Next glossary

Who is online

Users browsing this forum: No registered users and 2 guests