New user and question

Don't be shy, come introduce yourself with the rest of the community
stainy
Posts: 4
Joined: Mon May 29, 2017 9:17 pm

New user and question

Postby stainy » Tue Aug 11, 2020 9:15 pm

Finally posting something.. had an acct for months.

So onto a question :)

Looks like I have the option of getting a bare board from the first time round.
I have a pi zero.. how would I go about getting a case etc for it to get it operational ?
What are my options.

thanks

:)

User avatar
mitja_i
Posts: 368
Joined: Tue May 30, 2017 6:27 am
Location: Ljubljana, Slovenia
Contact:

Re: New user and question

Postby mitja_i » Tue Aug 11, 2020 9:44 pm

Repro case from Retroradionics https://retroradionics.co.uk/ with Next holes done. You also need a special female connector for the RPi0 soldered.
Backer 423 @ 37% funded, 10th hour. Base version. Shipping nr. 533. Received February 19, 2020.
Backer 1027 @ 141% funded, 10th minute.

Original 48K (issue 4b) with IF1, two microdrives and vDrive.
---
ZX Spectrum Next glossary

stainy
Posts: 4
Joined: Mon May 29, 2017 9:17 pm

Re: New user and question

Postby stainy » Tue Aug 11, 2020 9:51 pm

Great thanks..

soldered as apposed to using the header? because of the clearance ? or lack thereof

User avatar
SevenFFF
Posts: 565
Joined: Mon Jun 05, 2017 5:30 pm
Location: USA

Re: New user and question

Postby SevenFFF » Tue Aug 11, 2020 10:44 pm

No, it’s still a 2x20 header, but it’s female instead of the more typical male, and it’s fitted to the other less typical side of the Pi board - so it ends up installed like this:

Image
Robin Verhagen-Guest
SevenFFF / Threetwosevensixseven / colonel32
NXtel NXTP ESP Update ESP Reset CSpect Plugins


Who is online

Users browsing this forum: No registered users and 3 guests