Using a Disciple with the Next

This section is for discussing everything about Next hardware and latest updates.
User avatar
wallyweek
Posts: 9
Joined: Tue May 30, 2017 6:52 am

Using a Disciple with the Next

Postby wallyweek » Sun Jan 24, 2021 10:19 am

Hello everyone!

I understand from other threads that the Next is compatible with the Disciple Disk Interface, and still I'm not able to put it at work.

I know for sure the Disciple *is* working, because it *does* when hooked to the 48K, I guess it's just a matter of conflict with some Next built-in hardware.

Any advice on that please?

Thanks in advance! :)

User avatar
sol_hsa
Posts: 273
Joined: Fri Jun 02, 2017 10:10 am
Location: Finland
Contact:

Re: Using a Disciple with the Next

Postby sol_hsa » Sun Jan 24, 2021 7:43 pm

Are you sure you're running the next in a 48k mode?

User avatar
wallyweek
Posts: 9
Joined: Tue May 30, 2017 6:52 am

Re: Using a Disciple with the Next

Postby wallyweek » Sun Jan 24, 2021 9:05 pm

sol_hsa wrote:
Sun Jan 24, 2021 7:43 pm
Are you sure you're running the next in a 48k mode?
I've tried both the 128K and 48k personalities. :(

User avatar
Timbucus
Posts: 287
Joined: Tue May 30, 2017 7:43 pm

Re: Using a Disciple with the Next

Postby Timbucus » Sun Jan 31, 2021 10:25 am

It works with some DiSCIPLE versions but, not all - I have one that it does not work with unfortunately a very early model.
I'm Infinite Imaginations when not in work... PAWS for thought.

AndyCalling
Posts: 28
Joined: Thu Feb 27, 2020 9:35 pm

Re: Using a Disciple with the Next

Postby AndyCalling » Tue Feb 09, 2021 12:19 am

What happens if you change to an actual 48K core instead of using NextOS 48K mode?

I'm just throwing it out there in case you haven't tried it already.

Alcoholics Anonymous
Posts: 781
Joined: Mon May 29, 2017 7:00 pm

Re: Using a Disciple with the Next

Postby Alcoholics Anonymous » Wed Feb 10, 2021 4:43 am

I am not sure if you are the same person as posting on facebook but there is a recent conversation about the disciple here:

https://www.facebook.com/groups/specnex ... 0613851255


Who is online

Users browsing this forum: No registered users and 2 guests