Daughterboard header pinout (SD card and buttons)

This section is for discussing everything about Next hardware and latest updates.
User avatar
mitja_i
Posts: 202
Joined: Tue May 30, 2017 6:27 am
Location: Ljubljana, Slovenia
Contact:

Daughterboard header pinout (SD card and buttons)

Postby mitja_i » Wed Dec 13, 2017 8:12 am

Image
Backer 423 @ 37% funded 29 days left
---
ZX Spectrum Next glossary

User avatar
Andy P
Posts: 123
Joined: Mon May 29, 2017 9:15 pm
Location: Lancashire

Re: Daughterboard header pinout (SD card and buttons)

Postby Andy P » Thu Dec 14, 2017 12:09 am

Interesting ... I have had a look at the underside of the PCB and It looks like CS2 is connected between Micro SD and the FPGA.

The rest of the lines are shared which is fine. So selecting CS (chip select) or CS2 will determine which SD slot is in use.

Think I'll order a couple of Micro SD slots from China as this looks promising.

User avatar
Timbucus
Posts: 205
Joined: Tue May 30, 2017 7:43 pm

Re: Daughterboard header pinout (SD card and buttons)

Postby Timbucus » Fri Dec 15, 2017 11:10 pm

There is no support in the core yet for the second card - but, it is coming very soon... some have already soldered it on and are waiting...
I'm Infinite Imaginations when not in work... PAWS for thought.


Who is online

Users browsing this forum: No registered users and 2 guests