Cant get Grey ZX Spectrum +2 128k to display on TV

Everything that is not ZX Spectrum Next goes here. Get ready for the Nostalgia!
Post Reply
Actionmainly
Posts: 1
Joined: Thu Nov 09, 2017 1:48 pm

Cant get Grey ZX Spectrum +2 128k to display on TV

Post by Actionmainly » Thu Nov 09, 2017 1:54 pm

Hello,

I have a Grey ZX Spectrum+2 128k. I have the original power supply and the system is powering on ok with the tape deck fully functional. I am however having a problem getting it to display on a TV. The aerial cable does not seem to be getting detected on my TV,
but I put this down to an issue with it being a modern TV. I then purchased an RGB to SCART cable that is designed for the exact model I have however what I am getting when I plug it in is what can be seen in the image below.

Image

There is something there but I cannot get it to display properly. Can anyone offer any advice where I am going wrong?

dave18
Posts: 86
Joined: Tue May 30, 2017 1:06 am
Location: Bristol, UK

Re: Cant get Grey ZX Spectrum +2 128k to display on TV

Post by dave18 » Thu Nov 09, 2017 4:45 pm

The image hasn't embedded properly in your post

dave18
Posts: 86
Joined: Tue May 30, 2017 1:06 am
Location: Bristol, UK

Re: Cant get Grey ZX Spectrum +2 128k to display on TV

Post by dave18 » Thu Nov 09, 2017 4:46 pm

You may want to post over the WOS, there is a lot of the same people on both forums but you might get some more hardware focussed expertise over there.

Post Reply